SINGLE PUMP CEMENTING UNIT
Model UEM 550SSMR Skid Mounted Single Cementing Unit
Applications:
- Can carry out all Primary, Secondary and remedial Cement jobs.
- Unit can mix Cement Slurry on the fly from 7.5 ppg to 22 ppg slurry weight.
- The unit can perform BOP pressure test up to 10,000 psi.
- The Unit can carry out full displacement after pumping the cement slurry using Well fluid under use.
- Perform Leak off test.
- Perform Hermetical test
Specifications:
The unit is rated to deliver and meet the following parameters:
- Discharge pressure of 10,000 psi pumping pressure.
- Flow rate of the Unit with each of the H.P Pumps can deliver 13.2 bpm (2.11m3/min)
- The unit is equipped with a secondary Diesel Engine, provided as a back up for the Cement mixing module on the unit.
- Cement slurry densities mixed on the fly range from 7.5ppg to 22.0 ppg
- For small plug or pressure testing applications can deliver 15,000 psi discharge pressure.
- The unit has inbuilt twin Displacement tank with a total of minimum 20 bbl. (3m3) capacity.
- All discharge H.P iron is of size 2” and rated for 15,000 psi pumping pressure.
Re-circulation mixing provisions:
The Unit has inbuilt high Energy Recirculating Cement Mixer, which mixes and homogenizes dry bulk cement with mix water and Recirculated Cement Slurry. The rate of mix water addition is controlled by a controlled hydraulically actuated valve built within the High Energy Recirculating Cement Mixer.